Wednesday, August 26, 2015

[MW:23351] Sscc test

Dear All.
If the test is done, according to ASTM G39, or NACE TM0177 bending method.
1.what is different between results of these standards?
2.how the amount of stress is specified?because we have a same material that tested in two different labs,one of that tested with 72%  yield and another with 90% ?
Regards.

--
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at http://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CALcH7WBqjwBTm8VeoMBzr-is_u4Pb0icfWqWg9rDKNWQZENtVw%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.

No comments:

Re: [MW:35289] Welding consumable for S355J2WP material

S355 J2 WP  is a weathering structural steel  It has better atmospheric corrosion resistance. Use E 8018 - W1/W2  Electrodes This is regular...