Dear
It is not acceptable , Post heat shall be carried as per approved WPS
On Mon, Aug 3, 2015 at 8:01 AM, biju <biju.psl@gmail.com> wrote:
Our client spec. requires 5Cr material with thickness more than 10mm requires dehydrogenition heat treatmnet--But the contractor has welded and immediately completed PWHT without going for DHT, Is that acceptable
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at http://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/6c6af4e1-2a5b-4a8f-9aab-993accc61023%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
Regards
SHANMUGANATHAN SUBBIAH
AIB- Vincotte International & Partners LLC
PO.Box-420, PC -116
MAF, Sultanate of Oman
Tel: +968 24565771
Fax: +968 24565772
Mob: +968 92096714
Web:www.vincotte.com
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at http://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAD2bsBR-xgN%3DdEpFipj-O-nBy7XiSJdNxgbDHe%3D0HpyKMxBfUw%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.
Comments