Hi,
Refer QW 202.3, in ASME Sec IX. I think this clears your problem.
Regrds,
CH V RAMANA
BVIL
On Monday, 3 August 2015 2:08 PM, Martin Prad <martin_prad@hotmail.com> wrote:
Hi,
Would it be possible to share your thoughts about the qualification range of repair welding procedure on thickness as per ASME IX?
Base metal is super duplex:
Original weld procedure: 18 mm pipe w/t -qualification range is 18 to 1.5 T as per client spec
Repair procedure: 18 mm pipe. Full thk repair. Reference in the spec is ASME IX. There is no info in ASME IX for repair welding qualification range.
Would you share your thoughts please?
regards,
M.
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at http://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/DUB120-W49A307C25D7875A8D6F1EF9A770%40phx.gbl.
For more options, visit https://groups.google.com/d/optout.
Comments