what is the service and operating parameters(pressure and temp) . And are u sure that it had occurred in service and is not a manufacturing defect ?
On Saturday, 8 August 2015 10:08:27 UTC+5:30, Kunal Patel wrote:
-- On Saturday, 8 August 2015 10:08:27 UTC+5:30, Kunal Patel wrote:
dear expert,
pl. review the attached photo first. let me know, what are the causes for crack developed in weld joints between cap to condenser flange ?
I observed crack at fillet weld joints (partition plate to cap inside surface) - how it was occurred ? would both cracks be intersected from inside ?
your valuable reply will be appreciable.
r/s
Kunal Patel
Bureauveritas
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at http://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/874887c0-04b5-435b-8ea9-c7a5e19eaad1%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
No comments:
Post a Comment