Re: [MW:20429] Welding of Super Duplex SS

Dear Hrushikesh

What type of gas mixture did you use for the specific welds?

Best Regards

Dr. Kostas Migiakis

Materials & Welding

28 Μαρ 2014, 18:22, ο/η Hrushikesh Sangamnerkar <hrushi612@gmail.com> έγραψε:

Hi all,

Base Metal: SUS 329J4L

Filler Metal: WEL TIG 329J4LT

Process: GTAW

Ferrite required (%Fe): 30-55%

Presently the ferrite obtained is on higher side.

%Fe=60-65.

Wanted good welding practice if any one worked with this material. Kindly help with some literature for the same.

--
Hrushikesh H Sangamnerkar

09724738118

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
 
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.