As you want to cut it you can also do it with oxygen flame cutting but for controlling hardness and to avoid serration you can do preheat and if. Thickness is less you can also cut it by grinding self grinder.
On 06-Mar-2014 5:34 PM, "Binoy Lonappan" <binoypl3@gmail.com> wrote:
-- --Dear All,Can anyone tell me regarding the cutting of SA 335 P22 pipe cutting procedure.Can we go for Flame cutting or is it mandatory to cut it by Grinding wheel.Is it mentioned anywhere in standard regarding oxygen flame cutting restriction and the reasons behind this.If cutting by Oxygen flame is done and if it is not good what corrective action to be taken against this..
--With Regards
Binoy Lonappan
QAC Engineer
TECCL
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
Comments