no requirement
THANKS & BEST REGARDS
KG.PANDITHAN, AWS-CWI, CSWIP 3.1
CONSULTANT-WELDING & QUALITY
On Fri, Mar 21, 2014 at 3:36 PM, rajesh s. mhaske ,Engineer Welding ,PUNE,INDIA <rajesh.mhaske17@gmail.com> wrote:
Dear Ganesh sir,--
Hardness values are dependent upon factors such as alloy content, weld preheat and postweld heat treatment. Specific hardness test for welded joints are not specified in asme sec -ix except Temper bead and overlay .
in your case hardness test is not required for low carbon nickel-chromium-molybdenum-copper alloy steel
but it is also defend upon specification of your customer ,design application or service application so refer your specification of customer
Rajesh S Mhaske
Engineer Welding
CSWIP 3.1,ASNT Level-II
On Thursday, March 20, 2014 10:49:24 PM UTC+5:30, Ganesh Mahankal wrote:Dear All,While performing a PQR of butt joint (plate to plate ) of SB 575 UNS N06059 to SB 575 UNS N06059 with ASME sec IX ,Is it a hardness test is required ? ( except tension & bend ).Is this hardness requirement is requirement of other code like Sec II part B?plz guide.Ganesh MahankalAlfa Laval India Ltd Pune India+91 9970357971
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
No comments:
Post a Comment