Dear Rajesh,
As per My Knowledge
No,
Because,
Your welder A cannot weld below 73 mm OD.
Also both of your welder cannot deposit maximum because during initial qualification they not deposit at least 13 mm with three layers to qualify for maximum deposition.
Thanks
Regards
Ansari
Thanks
Regards
Intekhab Alam Ansari
Regards
Intekhab Alam Ansari
On Tue, Mar 18, 2014 at 5:02 PM, rajesh mhaske ,Welding Engineer,PUNE <rajesh.mhaske17@gmail.com> wrote:
Welder A:--
First WPQ
Qualification test coupon: 168 OD X 18.26 mm
Welding Process: GTAW + SMAW
Deposition Qualn Range: GTAW = 8 mm, SMAW = Max to be welded.
Welding Position: 5G
Position Qualn Range: F, V, O
Second WPQ
Qualification test coupon: 63.5 OD X 6.35 mm
Welding Process: GTAW + SMAW
Deposition Qualn Range: GTAW = 4 mm, SMAW = 8.7.
Welding Position: 6G
Position Qualn Range: All
Welder qualification as per ASME sec IX
Can these two qualifications be combined as below:
Qualification min OD: 25 mm
Welding Process: GTAW + SMAW
Deposition Qualn Range: GTAW = 8 mm, SMAW = Max to be welded.
Position Qualn Range: All
Please suggest.
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
Comments