Re: [MW:20328] Acceptable Values for Charpy Impact Test at -(minus) 196 degC for A312 TP304

Hi Choudhary,

Please see ASTM A 370 table 9 for charpy  value acceptance criteria for subsize specimen.

Cheers,

Tri Yulianto
BAM Clough JV - Wheatstone LNG

On Mar 14, 2014 8:00 PM, "Anurudh Choudhary" <theoilgasengineer@gmail.com> wrote:

Dear All,

I'm using A312 TP304 pipe for design temperature -(minus) 196 degC for BOIL OFF GAS (BOG) service.

we have carried out the charpy impact test at -(minus) 196 degC for the pipe. we are having average value of Joules for pipe specimens.

Please provide/guide me with the Acceptable value for Charpy impact values( Joules) at -(minus) 196 degC along with codes/reference for A312 TP304 Pipe.

Kind Regards,

Choudhary Anurudh

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
 
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
 
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.