[MW:20432] Induction bend cutting during cross-country pipeline construction

Dear Experts,

I am now working on a Ø30" cross-country pipeline project. At my project one AP(Angle Point) needed 12° Bend. so the fitter cut 22.5° induction bend in the middle & make it 11.25° & used it. I think that it is not acceptable. they should use pipe bending machine.

Experts comments needed & also applicable codes & standards regarding  field pipe bending.

Regards,

Md. Saidur Rahman

QA/QC

GTCL

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
 
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.