I had the same problem since in my country buying acetone is controlled by the federal police, and only allows small volumes. We use isopropyl alcohol.
I would like to meet other alternatives.
Em 20/03/2014 20:00, "Elamaran Rajan" <elams.rajan@gmail.com> escreveu:
-- Dear Experts
As per our company specification for Duplex SS before welding the
bevel surface should be cleaned with Acetone or any other cleaner
approved by client.
Hence am working in client side contractor proposed the cleaner which
we using for cleaning during penetrate test (DPT)
My question is that DPT cleaner is acceptable or any other
recommendation to replace the acetone from your experience
Am expecting your valuable comment pease
Regards
Elamaran Rajan
Welding Inspector
IPMT
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
No comments:
Post a Comment