Dear Mohammed,
As per the clause 9.2.2.3 Impact testing required if you will be use automatic or semiautomatic process only.
If you refer Figure 4-1a— (SI) Minimum Permissible Design Metal Temperature for Materials Used in Tank Shells without Impact Testing in API 650 for Impact testing of the plate material is not required up to 10 mm thk.
Specify your maximum job thickness to define the require impact test temperature.
Thank You,
Hema Santosh.
On Sat, Mar 15, 2014 at 4:10 PM, S.Mohammed <mohd52100@gmail.com> wrote:
dear all,
WPS avaible with material A283 C without impact.
design temp -6C
what is impact req as per API 650 ed 2013,
it requre to qualify for impact as per 9.2.2.3?
regrds
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
No comments:
Post a Comment