you have to use the Discs for SS for SS works otherwise it will be contaminated by carbon and starr rust The Difference is the same between CS and SS that is why the SS discs are expensive Regards, |
From: Richard robes <mech.processes@gmail.com>;
To: <materials-welding@googlegroups.com>;
Subject: [MW:19395] Cutting & Grinding Disc Composition
Sent: Thu, Nov 28, 2013 1:04:03 PM
Dear Gents, -- Please comment regarding the issue, What is the composition of SS and CS Cutting & Grinding wheels? Is there any problem if we use Cutting wheel marked as for CS in SS Piping material? Is there any material that can cause contamination and rust in SS piping if we use CS cutting / grinding wheel? Regards Richard To post to this group, send email to materials-welding@googlegroups.com To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com For more options, visit this group's bolg at http://materials-welding.blogspot.com/ http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents. --- You received this message because you are subscribed to the Google Groups "Materials & Welding" group. To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com. For more options, visit https://groups.google.com/groups/opt_out. |
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.
No comments:
Post a Comment