Re: [MW:19335] Corrosion on Stainless Steel Vessel Weld

Dear Raju,

This is because of Carbide Precipitation, Pls check the IGC as per SA262 Pr.E.

To avoid the such crack you should have to do solution annealing after rectification of the tank.     

On Friday, November 22, 2013 6:57:39 AM UTC+5:30, kalidindi raju wrote:

Dear Friends,

 

Thanks for the views.

Would like to share some more info.

 

We carried out In-situ Metallography and DPT to the stained areas.

Found transverse cracks at stained locations using both the techniques.

 

The cracks are present on weld and either side of HAZ and are transgranular in nature. 

The cracks were observed both on circumferential seam and long seam.

They are branching on either side of HAZ with the portion on weld being a zigzag line.

 

Prima facie this appears to be a case of environment assisted cracking but still investigating the cause.

 

Regards,

Eswar Raju.

 

 

 

 

 

On Thu, Nov 21, 2013 at 2:50 AM, Perumal Govindan <perumal...@gmail.com> wrote:

Mr. Raju,

Probable cause for this corrosion are,

1.the tanks located in a highly corrosive environment containing chlorides,

2. right choice of welding consumable, proper gas shielding and purging, welding technique, acid pickling and cleaning was not followed during manufacturing stages, review inspection reports and confirm OR as per Inspection Test Plan, the manufacturing process were not followed,

3. During Fit Up of of shell courses, different welding consumable (CS filler wire or electrode) might be used for tack weld.

4. very heavy grinding was carried out while fabrication without adequate protection of atmosphere.

With regards

P Govindan

On Wed, Nov 20, 2013 at 3:22 AM, kalidindi raju <eswar...@gmail.com> wrote:

Dear Friends,

 

On a recent inspection of a Stainless Steel Vessel, there were some corrosive stains observed on near the weld.

Please refer to the pictures attached.

The stains indicate a leakage/flow behavior of the containment.

However, when observed visually there was no leakage of any liquid.

 

The vessel was in service since 2008.

Material of construction is Stainless Steel SS 316.

 

What could be the probable cause of this behavior?

Please share your views.

 

Regards,

Eswar Raju.

 

 

 

 

--

To post to this group, send email to material...@googlegroups.com
To unsubscribe from this group, send email to materials-weld...@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
 
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-weld...@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.

--
To post to this group, send email to material...@googlegroups.com
To unsubscribe from this group, send email to materials-weld...@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
 
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-weld...@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
 
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.