Re: [MW:19341] after normalizing dish end weld buildup

 

Hi

 

As the thickness of Dish end is 25mm as mentioned in trailing email, which is more than 16mm, normalizing has to be done after forming (as per EIL specs).

Regards

 

Prem Nautiyal

 

 

On Wednesday, November 13, 2013 5:13 PM, vijay <vijay.3085@rediffmail.com> wrote:

Dear sir,

I have the following doubts to clear in the fabrication of CS plate 25thk
1. can i weld buildup in dish end after normalizing?

Please give your valuable advice






Thank You 
BEST REGARDS
vijay kurkutiya

Get your own FREE website, FREE domain & FREE mobile app with Company email.

Know More >

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
 
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.