Dear jean,--can you advice the acceptance of TI for piping as per ASME B31.3.
On Monday, August 13, 2012 4:36:11 PM UTC+4, Jean Staton wrote:Curious, first code reference was ASME VIII, DIV. 1 why did you reference ASME B 31.3? I am unable to see any reference in ASME VIII that tells me to reference B31.3. WHY would we go to a piping code when we are on a vessel code in the first place?
From: material...@googlegroups.com [mailto:material...@googlegroups.com] On Behalf Of Jatin Dave
Sent: Saturday, August 11, 2012 7:48 AM
To: material...@googlegroups.com
Subject: Re: [MW:15064] Acceptance criteria for Tungsten Inclusion in RT
Dear Prem,
IN ASME B 31.3 Table No. 341.3.2 criteria are given
F Slag inclusion, tungsten inclusion, or elongated indication
Individual length ≤ T w /3
Individual width ≤ 2.5 mm (3⁄32 in.) and ≤ T w /3
Cumulative length ≤ T w in any 12T w weld length
G Slag inclusion, tungsten inclusion, or elongated indication
Individual length ≤ 2T w
Individual width ≤ 3 mm (1⁄8 in.) and ≤ T w /2
Cumulative length ≤ 4T w in any 150 mm (6 in.) weld length
Please see Table
Regards
Jatin Dave
9099026886
From: joydev dalai <joykol...@gmail.com>
To: material...@googlegroups.com
Sent: Friday, 10 August 2012 10:51 AM
Subject: Re: [MW:15053] Acceptance criteria for Tungsten Inclusion in RT
Dear Prem,
There is nothing cleared about tungsten inclusion, for better information please see in ASME sec.VIII Div.1 ,UW-51 paragraph
On Thu, Aug 9, 2012 at 9:24 PM, prem nautiyal <prem_na...@yahoo.com> wrote:
Dear Friends
After reviewing a RT film of a Circ.seam joint (16mm thk), which has been welded with TIG + SMAW, i have observed a tungsten inclusion @2-3mm in dia.
The construction code of the vessel is ASME Sec VIII Div.1
No doubt this tungsten inclusion is a defect, but i would like to know whether there is any acceptance criteria related to diameter for the same in ASME Sec VIII Div.1. Please give Code reference.
Regards
Prem Nautiyal
Cell: 9769316004
--
To post to this group, send email to material...@googlegroups.com
To unsubscribe from this group, send email to materials-weld...@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
--
To post to this group, send email to material...@googlegroups.com
To unsubscribe from this group, send email to materials-weld...@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
--
To post to this group, send email to material...@googlegroups.com
To unsubscribe from this group, send email to materials-weld...@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
DISCLAIMER: The information contained in this e-mail may be confidential and is intended solely for the use of the named addressee. Access, copying or re-use of the e-mail or any information contained therein by any other person is not authorized. If you are not the intended recipient please notify us immediately by returning the e-mail to the originator.
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.
No comments:
Post a Comment