Re: [MW:19360] special UT procedure inspection for small pipe diameter and high thickness

dear P Govindan
 

thank you for answer and the requirement of Client / Specification depend on ASME code because all piping work is high gas small bore up to  6" and thickness up to 11.3mm carbon steel and alloy steel P91 and P11. 

On Sun, Nov 24, 2013 at 5:03 PM, Perumal Govindan <perumalgovindan@gmail.com> wrote:

Mr. Shipo,

Find out the requirement of Client / Specification. Once known the Client requirement we may write a special UT procedure, after referring Codes and Standards.

P Govindan

On Sun, Nov 24, 2013 at 12:31 PM, Shipo shipo <shipo.ptj@gmail.com> wrote:

dear all

please i want to how do  special UT procedure inspection for small pipe diameter and high thickness and if you have procedure copy to guide me.

--

     

     BEST REGARDS

    SHAABAN MOHAMED ALI SOLIMAN

      QA/QC DEPARTMENT

     PETROJET MARINE DEPARTMENT

     Mobile: +2 012 27 02 44 53

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
 
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
 
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.

--

     

     BEST REGARDS

    SHAABAN MOHAMED ALI SOLIMAN

      QA/QC DEPARTMENT

     PETROJET MARINE DEPARTMENT

     Mobile: +2 012 27 02 44 53

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
 
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.