Hello Mohd,
Are you referring to Double Operator TIG(DOT) process. In many instances this technique is used by fabricators to avoid back-gouging. I've applied this for Sec-III, Nuclear components. For your case, i.e for Duplex S.S, what were the design requirements vs. the results achieved.
More input would be appreciated.
Thanks
Pradip Goswami, P.Eng,IWE
Welding & Metallurgical Specialist
Ontario, Canada
From: materials-welding@googlegroups.com [mailto:materials-welding@googlegroups.com] On Behalf Of kannayeram gnanapandithan
Sent: Thursday, September 26, 2013 12:38 AM
To: materials-welding
Subject: Re: [MW:18770] using of second welder while welding SS material
COULD U EXPLAIN THE TECHNIQUES
On Wed, Sep 25, 2013 at 7:38 PM, mohd <mohd52100@gmail.com> wrote:
dear one,
As explained by sridhar sir,
moreover we have welded as you discribe around 3000ton duplex plates with same texhniques called twin tig and it is very well accepltable by industries experts/ experienced client.
main advatages is good distortion control and weld dilution for ferrite.
regards
mohd.
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.
No comments:
Post a Comment