Re: [MW:18694] RT techniques superimpose Vs ellipse

Hi Shahu,

 

Follow as per mr Vedaraju. What is your wall thickness by the by? when the wall thickness goes high you can perform DWSI as well code permits. To meet your UG value follow mandatory / non mandatory in Art 2, Sec V, ASME.

 

Regards,
S.SENTHILKUMAR

From: M Vedaraju <MVedaraju@aveonoffshore.com>
To: "materials-welding@googlegroups.com" <materials-welding@googlegroups.com>
Sent: Wednesday, 18 September 2013 7:39 AM
Subject: RE: [MW:18692] RT techniques superimpose Vs ellipse

Dear Friend,

 

1.       Ellipse technique is better for 10  mm thick and less. When thickness of the pipe is more than 10 mm, it requires more source offset to form the ellipse so as to get the both film side & source side welds separated. Hence, it is advisable to use superimposed technique, if thickness is more than 10 mm.

 

2.       When pipe / diameter is one inch and less, it is again requires more source setting time to form the ellipse and get the both welds separated. Hence when the diameter is 1-inch and less, it is better to perform radiography with superimposed technique.

 

Thanks,

With kind regards,

M. Vedaraju

 

From: materials-welding@googlegroups.com [mailto:materials-welding@googlegroups.com] On Behalf Of Sonu Shahu
Sent: Wednesday, September 18, 2013 6:35 AM
To: materials-welding@googlegroups.com
Subject: Re: [MW:18685] RT techniques superimpose Vs ellipse

 

ellipse(two exposure) is better.

regards

s.m.shahu

 

On Tue, Sep 17, 2013 at 12:03 AM, mohd <mohd52100@gmail.com> wrote:

dear sir,
for pipe dia less than 88.9 we r using RT technique superimpose(three exposure) and ellipse(two exposure).

which one is better?. or both are same in context of defect evaluation.

regards,
mohd.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to mailto:materials-welding%2Bunsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm

The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to mailto:materials-welding%2Bunsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.

 

--
kunal

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
 
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
 
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.