There is no doubt about penetration(medium) level with E 7018 & E 7016 type electrodes compared to E 6010.
But what I have said is " E 7018 gives full penetration with DC EP & both E 7018 & E 7016 electrodes give deep
penetration with DC SP " and could be used for root application.
The penetration depth is comparable to welds made with E 6010 using DC RP.
Filler & Cap passes to be done with DC RP.
Sridhar.
From: kannayeram gnanapandithan <kgpandithan@gmail.com>
To: materials-welding <materials-welding@googlegroups.com>
Sent: Thursday, 26 September 2013 10:55 AM
Subject: Re: [MW:18770] Multiple process GTAW+SMAW Process,
7016&7018 will give medium penetration unlike 6010 which gives deep penetration
On Tue, Sep 24, 2013 at 11:17 PM, c sridhar <sridhar305@yahoo.com> wrote:
--E7018 type electrodes give radiographic quality full penetration welds on single 'v' groove butt joints with DC EP .
Both E 7016 & E 7018 type electrodes give deep and full penetration welds with DC EN (like in E 6010) and filler
passes to be continued with DCEP.
Both techniques were adopted successfully in pipe line joints.
sridhar.
From: "george.dilintas@gr.bureauveritas.com" <george.dilintas@gr.bureauveritas.com>
To: materials-welding@googlegroups.com
Sent: Wednesday, 18 September 2013 12:53 PM
Subject: Re: [MW:18690] Multiple process GTAW+SMAW Process,
--If you want to involve only SMAW then E-6010 is the only option for the root pass.
For filling you could continue with E-7018
rudolf saldanha ---17/09/2013 10:30:00---hI, Saravanan,
From: rudolf saldanha <rudolf_jude@yahoo.com>
To: "materials-welding@googlegroups.com" <materials-welding@googlegroups.com>
Date: 17/09/2013 10:30
Subject: Re: [MW:18673] Multiple process GTAW+SMAW Process,
Sent by: materials-welding@googlegroups.com
hI, Saravanan,
May I know if it is mandatory by code that back gouging has to be done when we have a Full Penetration Joint using only SMAW process.
As far as I know, backing and back gouging are supplementary essentials for SMAW process.
To get a full penetration it is not compulsory to go for GTAW + SMAW process, but we can still do it with SMAW only.
We can use LB52U which also belongs to SFA 5.1 just as E7018, and it is commonly used for welding on pipelines where welding is done on one side.
http://www.weldingsupply.com.au/index.php/kobe-lb52u-low-hydrogen.html
The above link may be of help.
Please correct me if I am wrong.
Thanks and regards
Rudolf
From: Saravanan Sornam <saravanshyla@gmail.com>
To: materials-welding@googlegroups.com
Sent: Tuesday, 17 September 2013, 14:05
Subject: Re: [MW:18670] Multiple process GTAW+SMAW Process,
Hi San ,
I said that , only SMAW on the Inaccessible Pipe size, for example 6 ", cannot be welded and even you cannot get Full Penetration using E7018 only on Single V Bevel.
It should be welded only by using GTAW for Root and subsequent welds by SMAW until Cap.
Regards,
Saravanan,
Korea
On Mon, Sep 16, 2013 at 7:32 PM, jaffar ali riyas mohamed nizamin <jaffarqc1987@gmail.com> wrote:
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.This message contains confidential information. To know more, please click on the following link: http://disclaimer.bureauveritas.com
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.
No comments:
Post a Comment