reason of crack
wrong filler wire or high heat input @check base metal or filler metal+ check welding parameter @weld profile related to welder skills
regards
Mahmoud
Date: Fri, 20 Sep 2013 01:52:43 -0700
From: sarav91k@gmail.com
To: materials-welding@googlegroups.com
Subject: [MW:18712] Re: Welding of SS316L
On Thursday, September 19, 2013 6:27:03 PM UTC+5:30, Krish QA wrote:
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.
wrong filler wire or high heat input @check base metal or filler metal+ check welding parameter @weld profile related to welder skills
regards
Mahmoud
Date: Fri, 20 Sep 2013 01:52:43 -0700
From: sarav91k@gmail.com
To: materials-welding@googlegroups.com
Subject: [MW:18712] Re: Welding of SS316L
Please refer attached picture for your review...
Regards
Krish
On Thursday, September 19, 2013 6:27:03 PM UTC+5:30, Krish QA wrote:
Dear Experts
SS 316L Plate of 2mm welded with ER316L filler wire (1.6mm) using GTAW proceeds with Argon 99.99% for WPS qualification.
After welding we found the following
1. Centre line crack on root side
2. Irregular weld profile on root side
Please advice how to medicate these discrepancies.
Regards
Krish
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.
No comments:
Post a Comment