dear ,
if u cannot do purging u may use Electrode R316LT1-5 for root without purging.
regards,
sam
On Fri, Sep 20, 2013 at 9:37 PM, Saravanan Krish <sarav91k@gmail.com> wrote:
Dear Mr.Patel
No Back purging given by Argon. This PQR qualification is to weld a
cabinets for instrumentation items.
Regards
Krish
> <http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk
On 9/20/13, Jatin Patel <jatin.patel@orientalindia.net> wrote:
> Dear Krish
>
>
>
> Are you given back purging by argon ?.
>
>
>
> With regards,
>
>
>
>
>
> From: materials-welding@googlegroups.com
> [mailto:materials-welding@googlegroups.com] On Behalf Of Krish QA
> Sent: Friday, September 20, 2013 2:23 PM
> To: materials-welding@googlegroups.com
> Subject: [MW:18712] Re: Welding of SS316L
>
>
>
> Please refer attached picture for your review...
>
>
>
> Regards
>
>
>
> Krish
>
>
> On Thursday, September 19, 2013 6:27:03 PM UTC+5:30, Krish QA wrote:
>
> Dear Experts
>
> SS 316L Plate of 2mm welded with ER316L filler wire (1.6mm) using GTAW
> proceeds with Argon 99.99% for WPS qualification.
>
> After welding we found the following
>
> 1. Centre line crack on root side
>
> 2. Irregular weld profile on root side
>
> Please advice how to medicate these discrepancies.
>
> Regards
>
> Krish
>
> --
> To post to this group, send email to materials-welding@googlegroups.com
> To unsubscribe from this group, send email to
> materials-welding+unsubscribe@googlegroups.com
> For more options, visit this group's bolg at
> http://materials-welding.blogspot.com/
> http://www.linkedin.com/groups/MaterialsWelding-122787?home=
> =anet_ug_hm> &gid=122787&trk=anet_ug_hm
>> You received this message because you are subscribed to a topic in the
> The views expressed/exchnaged in this group are members personel views and
> meant for educational purposes only, Users must take their own decisions
> w.r.t. applicable code/standard/contract documents.
> ---
> You received this message because you are subscribed to the Google Groups
> "Materials & Welding" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to materials-welding+unsubscribe@googlegroups.com.
> For more options, visit https://groups.google.com/groups/opt_out.
>
> --
> To post to this group, send email to materials-welding@googlegroups.com
> To unsubscribe from this group, send email to
> materials-welding+unsubscribe@googlegroups.com
> For more options, visit this group's bolg at
> http://materials-welding.blogspot.com/
> http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
>
> The views expressed/exchnaged in this group are members personel views and
> meant for educational purposes only, Users must take their own decisions
> w.r.t. applicable code/standard/contract documents.
> ---
> Google Groups "Materials & Welding" group.> To unsubscribe from this topic, visit
> https://groups.google.com/d/topic/materials-welding/qqvGeWTfweQ/unsubscribe.
> To unsubscribe from this group and all its topics, send an email to
> materials-welding+unsubscribe@googlegroups.com.Thanks & Regards
> For more options, visit https://groups.google.com/groups/opt_out.
>
--
Krish.Saravanan
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.
No comments:
Post a Comment