| Dear Mr. Prasad, Please find my point wise reply Aly -------Original Message------- From: N VENKATESWARA PRASAD Date: 9/27/2013 8:36:20 PM Subject: Re: [MW:18784] Impact testing failed with ER70S2 wire at -48°C & -35°C Hi, provide me the follwoing details 1. With PWHT or without PWHT With PWHT 650 deg C 180min 2. Size of Impact test coupon 10 x 10 x 55 3. Location of notch ( weld center line, HAZ ( FL or FL+1 or FL+2 ) WCL & HAZ WCL failed and HAZ passed 4. Base metal details SA516 Gr65 to SA516 Gr70 5. Test coupon size 50mm test coupon 19mm SMAW with E7018-1 top side , 12mm GTAW with ER70S2 middle and 19mm SAW with F7P10 EH12K bottom Regards N.V. PRASAD On Sun, Sep 22, 2013 at 1:00 PM, Mhaskar Aly <mhaskar.aly@gmail.com> wrote: Dear Friends,
I have tested one PQR where Impact testing (GTAW weld) got failed at -48°C & -35°C also; Impact values 9 joules at -48°C 12 Joules at -35°C I had received Filler wire with 3.1 certificate having impact tested at-50°C; kindly advise
Heat Input max 2.58KJ/mm Root run & 1.8Kj/mm for other runs Kindly advise Ali Mhaskar To post to this group, send email to materials-welding@googlegroups.com To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com For more options, visit this group's bolg at http://materials-welding.blogspot.com/ http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents. --- You received this message because you are subscribed to the Google Groups "Materials & Welding" group. To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com. For more options, visit https://groups.google.com/groups/opt_out. To post to this group, send email to materials-welding@googlegroups.com To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com For more options, visit this group's bolg at http://materials-welding.blogspot.com/ http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents. --- You received this message because you are subscribed to the Google Groups "Materials & Welding" group. To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com. For more options, visit https://groups.google.com/groups/opt_out. | ||
| |
No comments:
Post a Comment