If sub zero application is not there you can use simple E7018 also, Heat treatment could be required subject to code requirement and hardness observed after welding
regards
Ravinder Sharma
From: materials-welding@googlegroups.com [mailto:materials-welding@googlegroups.com] On Behalf Of shahid riaz
Sent: Thursday, January 19, 2012 11:30 PM
To: materials-welding@googlegroups.com
Subject: Re: [MW:13519] P1+P4 Fiiler
Dear friends,
ER70-S2 is best to weld good quality of root pass & its better to use E7018-A1 for SMAW process.
Shahid
On Mon, Jul 11, 2011 at 11:33 AM, Naresh Kumar <snareshkumar30@yahoo.com> wrote:
Dear friends,
I have a doubt about SA106 B+SA335 P11 disimilar welding;Which electrode is best?? whether ER70S2 OR ER80S-B2;
Regards,
S.Naresh
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
No comments:
Post a Comment