Thursday, January 19, 2012

Re: [MW:13503] Regarding welding consumable for Material hastelloy C276

Dear  Vivek Pandey,

Please refer the attached document in page 6 for the right filler material selection.
you can get good reference documents from Haynes International site for Hastelloy material.

Regards,
Vijay

On Wed, Jan 18, 2012 at 2:32 PM, Vivek Pandey <vivek.pande06@gmail.com> wrote:
Dear All

With reference to above subject,kindly suggest me which Consumable is
suitable for welding of hastelloy C276 material( UNS NO: N10276 ).
actually I want to do qualify in two different procedure.
preocedure are as follows

Material: UNS NO:N10276+UNS NO: N10276                PROCESS GTAW+ SMAW

Material: UNS NO:N10276 +SA182 GR 316L    PROCESS GTAW+ SMAW


KINDLY CONFORM TO ME AS SOON AS POSSIBLE


Regards
vivek pndey

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

No comments:

Re: [MW:34832] Inquiry about Single Bevel with Back Grinding

Dear Uday, As per your question that one is called with backing only,Simple both side you are welding it is backing with strip or without st...