You must have run the Impact test PQR in line with the same parameters of
original PQR which was qualified earlier. ( all essential variables must be
same. In addition, the Voltage, Current, travel speed also to be similar as
original PQR).
If so, you can make a new PQR, supporting with the original PQR.
But however, there is no provision in the Code to include the later test
results in the original PQR.
Only changes pertaining to wrong data input in the PQR or Code revision is
permitted (Ref QW-200.2(c)). In these cases, the PQR shall be recertified to
reflect the changes.
// "additional information can be incorporated into a PQR at a later date
provided the information is substantiated as having been of the original
qualification condition by lab record or similar data"//
The statement here is for, any missing information (Relates to Variables or
other information) not provided in the original PQR, may be included at
later stage, Provided these data are already recorded in the PQR run sheets
or lab reports.
The essence is, the PQR is a certificate issued based on the examination
(tests) which cannot be revised or altered for any reason. The additional
certifications may be issued separately.
BR
M.Vijayan
-----Original Message-----
From: materials-welding@googlegroups.com
[mailto:materials-welding@googlegroups.com] On Behalf Of rinshu
Sent: Sunday, January 15, 2012 8:46 AM
To: Materials & Welding
Subject: [MW:13478] Additional information into a PQR
Dear All,
We have a PQR in which we did all the mechanical testing as per the
requirement of Sec IX.We would like to add some additional hardness and
impact test result to the same PQR.I have referred the code Para.
QW-200.2 which states that
"additional information can be incorporated into a PQR at a later date
provided the information is substantiated as having been of the original
qualification condition by lab record or similar data"
Can anyone tell me what are the documents to be added to the original PQR to
satisfy the code requirement.
Rins.
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to
materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at
http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and
meant for educational purposes only, Users must take their own decisions
w.r.t. applicable code/standard/contract documents.
This communication and any files transmitted with it are confidential and may also be privileged. It is for the exclusive use of the intended recipient(s). If you are not the intended recipient or the person responsible for delivering it to the intended recipient(s), please note that any form of distribution, copying or use of this communication or information contained in it is strictly prohibited and may be unlawful. If you have received this communication in error please return it to the sender, and delete the material from any computer. We reserve the right to monitor email communications through normal internal and external networks. We believe but not warrant that the email and the attachments are virus free. The statement and opinions expressed in this communication are those of the writer and do not necessarily represent those of Madina Group, whose registered office address is
P.O. Box 20459, Doha, Qatar.
Tel. +974 44600818
Fax. +974 44603143
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
Comments