FW: FW: [MW:13476] RE: 13463] SSCC testing

NACE TM0177 testing at high temperature.
 
From: materials-welding@googlegroups.com [mailto:materials-welding@googlegroups.com] On Behalf Of pgoswami
Sent: 14 January 2012 09:51
To: materials-welding@googlegroups.com
Subject: [MW:13475] RE: 13463] SSCC testing
 
Hello Jignesh,
 
What's the standard to be followed for SSCC testing.
 
Appreciate your reply.
 
Thanks.
 
Pradip Goswami,P.Eng.IWE
Welding & Metallurgical Specialist & Consultant
Ontario,Canada.
Email-pgoswami@sympatico.ca,
pgoswami@quickclic.net
 

---

From: materials-welding@googlegroups.com [mailto:materials-welding@googlegroups.com] On Behalf Of Desai Jignesh (Mumbai - Piping)
Sent: Thursday, January 12, 2012 10:19 PM
To: materials-welding@googlegroups.com
Subject: [MW:13463] SSCC testing
Hi,
For sulphide stress corrosion cracking of any material at high temp and 90 bar pressure if 0.005 mole % H₂S is required, is the test same if pressure is reduced to 60 bar and mole% H₂S is increased to obtain same partial pressure.   i.e, if we increase mole % H₂S and decrease total pressure, is the test condition remain same or alter?
Regds/Jignesh
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

Disclaimer :This email and any files transmitted with it are intended solely for the use of the addressee(s) only and may contain confidential and/or privileged information. If you are not the addressee, then this message is not intended for you and be advised that you have received this email in error and that any use , dissemination , forwarding, printing or copying of this email is strictly prohibited. In such case please notify the sender and delete this email and any attachments with it from your system immediately.Receipt of this email by you shall not give rise to any liability on the part of Larsen & Toubro Limited