you can weld a test piece as per the establised pqr and have to do
only the additional tests as per your new requirements. then you can
make a new pqr and new wps.
hareesh k v
On 1/15/12, rinshu <rinshad043@gmail.com> wrote:
> Dear All,
>
> We have a PQR in which we did all the mechanical testing as per the
> requirement of Sec IX.We would like to add some additional hardness
> and impact test result to the same PQR.I have referred the code Para.
> QW-200.2 which states that
>
> "additional information can be incorporated into a PQR at a later
> date provided the information is substantiated as having been of the
> original qualification condition by lab record or similar data"
>
> Can anyone tell me what are the documents to be added to the original
> PQR to satisfy the code requirement.
>
>
> Rins.
>
> --
> To post to this group, send email to materials-welding@googlegroups.com
> To unsubscribe from this group, send email to
> materials-welding+unsubscribe@googlegroups.com
> For more options, visit this group's bolg at
> http://materials-welding.blogspot.com/
> The views expressed/exchnaged in this group are members personel views and
> meant for educational purposes only, Users must take their own decisions
> w.r.t. applicable code/standard/contract documents.
>
--
----------------------
Hareesh K V
+91-9447625012
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
No comments:
Post a Comment