Skip to main content

Re: [MW:13508] RE: 13498] compatible forging material for SA 517 grade E plate

By Materials & Welding

Dear Mr. Hemant,

Pl check SA 592 Gr. E. which is compatible with SA 517 Gr. E.

With Best Regards,

Jignesh R Rana
Manager - Materials Technology, QA/QC & Standards

Linde Engineering India Pvt. Ltd.
'Linde House'
Opp: VUDA Office, VIP Road, Karelibaug,Vadodara - 390018, India.
Tel.: +91 265 3056789, Fax: +91 265 2335213 , Mobile: +91 90999 86019
jignesh.rana@linde-le.com, www.linde-india.com

This e-mail is confidential. If you are not the intended recipient, please notify us immediately. You should not disclose its contents to any other person nor use it for any purposes.




"pgoswami" ---19-01-2012 09:09:54---Hi Hemant,

From: "pgoswami" <pgoswami@quickclic.net>
To: <materials-welding@googlegroups.com>
Cc: <c2hemant@gmail.com>
Date: 19-01-2012 09:09
Subject: [MW:13506] RE: 13498] compatible forging material for SA 517 grade E plate
Sent by: materials-welding@googlegroups.com




Hi Hemant,

It's difficult to find the exact compatible forging grade to SA 517 steel. You may have to select grade which may be close, though not exactly similar in chemical composition. What're the grades you've in mind?
Why did you select SA 517 Gr E for a high temperature component like steam drum. Is there any compelling reason for the same and what the design conditions are?

This steel is not exactly welding friendly and there could be all sorts of issues at higher thickness.

See the attached catalogue, for your reference. Note ASTM A 514 and SA-517 steel are of back to back composition.


Thanks.



Pradip Goswami,P.Eng.IWE
Welding & Metallurgical Specialist & Consultant
Ontario, Canada.
Email-pgoswami@sympatico.ca,
pgoswami@quickclic.net
From: materials-welding@googlegroups.com [mailto:materials-welding@googlegroups.com] On Behalf Of hemant chintamani
Sent: Tuesday, January 17, 2012 1:07 PM
To: materials-welding@googlegroups.com
Subject: [MW:13498] compatible forging material for SA 527 grade E plate

To the experts,

I am designing steam drum using SA 517 grade E plate material in ASME Sec, VIII, Div. II. For this please suggest me a compatible forging material for designing of nozzles.

--
Thanks & regards,

Hemant B. Chintamani
Sr. Design Engineer,
ISGEC Heavy Ind. Ltd.,
India.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents._
This mail item contained either a password protected, encrypted or unscannable attachment and could not be checked for viruses. The attachment is removed based on Linde corporate policy. If you require this file for business reasons please contact your local helpdesk with the request to release it to you.


The file(s) was:
ARCELORMITTAL A514 AND T-1.pdf

Removed by:gweua3adm.linde.grp

Comments

Post a Comment

Popular posts from this blog

Materails FAQs

By Materials & Welding
Q: What are equivalents for standard Q 235 B (and Q 235 A) for U-channels? (asked by: boris.vielhaber@vait.com) A: DIN Nr. = 2393 T.2, 2394 T.2, EN 10025 W. Nr. DIN 17007 = 1.0038 Design DIN 17006 = RSt 37-2, S235JRG2 (Fe 360 B) Q: What is St DIN 2391 BK material? (asked by: dmcandrews@automaticstamp.com) A: Precision steel tubes, cold-finished/hard. Q: What is C.D.W. Boiler Tube? (asked by: montydude123@yahoo.com) A: Cold Drawn Welded Boiler Tube. Q: WHAT IS W.Nr. 1.4301? PLS TELL US IN EASY LANGUAGUE (asked...
21 comments
Read more

Heat tint (temper) colours on stainless steel surfaces heated in air // Heat tint

By Materials & Welding
Introduction The colour formed when stainless steel is heated, either in a furnace application or in the heat affected zone of welds, is dependent on several factors that are related to the oxidation resistance of the steel. The heat tint or temper colour formed is caused by the progressive thickening of the surface oxide layer and so, as temperature is increased, the colours change.   Oxidation resistance of stainless steels However, there are several factors that affect the degree of colour change and so there is no a single table of colour and temperature that represents all cases. The colours formed can only be used as an indication of the temperature to which the steel has been heated. Factors affecting the heat tint colours formed Steel composition The chromium content is the most important single factor affecting oxidation resistance. The higher the chromium, the more heat resistant the steel and so the development of the heat tint colou...
Post a Comment
Read more

Re: [MW:10788] ON PLOT PIPING & OFF PLOT PIPING

By Materials & Welding
Piping systems involved for the flow lines and gathering lines from the well head isolation valve to the production facility or processing plant isolation valve are determined as OFF PLOT. ON PLOT defines piping system in the processing plant and production platform. ANSI/ASME B31.4 applies for off plot piping system. B31.4 allows the use of either API 1104 or ASME section IX (as appropriate). However, occasionally, a very small system such as piping within 500 feet of a processing plant (some client also said 400 feet) may be declared B31.3 rather than B31.4. When B31.3 is invoked, only ASME Section IX is used. before you decide which code to use for welding procedure and/or welder qualification for pipe welding, you have to know the design and construction code applicable to the system. Please read far enough into scope and diagram illustrating the application of either B31.3 and B31.4 hope this helps rgds 2011/4/21 pradip kumar sil < pradipsil@gmail.com > Dear all, ...
Post a Comment
Read more