HI,
As per my view nothing failure in service …
1. All the welding which are done in the same manner are proved in NDT & HT for regular main lines, then in such case if golden tie in is not HT tested means not to be doubted its efficiency. all the weld strength and remaining parameters are same like as main line welding.
Thanks and Regards................?
|
| Lakshman Kumar.B|Manager |Lanco Infratech Limited Plot No 1255 | Sanjeevani chowk | Mahanadi vihar | Cuttack 753004 Phone : + 91 671 2445033 | Mobile : +91 9937286851 |www.lancogroup.com Go Green|The future will thank you |
From: materials-welding@googlegroups.com [mailto:materials-welding@googlegroups.com] On Behalf Of Arun Jacob
Sent: Thursday, November 03, 2011 11:40 PM
To: materials-welding@googlegroups.com
Subject: [MW:12852] Re: Closour weld(Golden Joint)
On Thu, Nov 3, 2011 at 2:10 PM, Arun Jacob <jacob.igcs@gmail.com> wrote:
Hi, all
At what extent a joint is liable to fail during operation if it not hydrotested proof (Because due to some constructability reason this particular joint is closour weld/Golden joint).Assume the joint passed all NDE (Radio graphy &MPI/DPI).
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
No comments:
Post a Comment