You can use Prods with Dry Method. You can try with 8A Red MPI powder of
Magnaflux make.
Regards
fredric
-----Original Message-----
From: materials-welding@googlegroups.com
[mailto:materials-welding@googlegroups.com] On Behalf Of
prabhakarmet@gmail.com
Sent: Tuesday, November 01, 2011 9:10 AM
To: materials-welding@googlegroups.com
Subject: [MW:12806] Magnetic particle testing of fillet joints - Yoke or
Prod?
Hi,
Could someone throw some light on the the following topics:
1. Which method (Yoke or Prod) should be used to inspect Fillet welds with
Magnetic Particle Inspection.
Thanks & Regards,
G.Prabhakar
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to
materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at
http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and
meant for educational purposes only, Users must take their own decisions
w.r.t. applicable code/standard/contract documents.
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
No comments:
Post a Comment