Re: [MW:3904] Welding of SS304 and SS316

GTAW +SMAW is usually adopted 

On Sat, Dec 26, 2009 at 9:39 PM, Mathew Bosco <bosco.wilson@gmail.com> wrote:

hi

to select the process we have to know the shedule. ;prefered process is GTAW. IF THE SHEDULE IS HIGH THAN GO FOR GTAWW + SMAW. ELECTRODE IS 316L FILLER AND ELECTRODE.

THX & RGDS
M.M.REDDY
mog_mahendra@rediff.com
0020198687114

note : willson friend reddy.

On Sat, Dec 26, 2009 at 9:26 AM, Ohm-Srinivasulu. K <nirgunaya@yahoo.com> wrote:

Hi,   I want to weld SS316 DIN W.N flange SS304 Pipe, could anyone tell me what kind of welding is prefered and electrodes.   Thanks Srinivas             ohm guru namasivaya

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

--
with Regards


SAQIB JALAL
Inspection Engineer
PakArab Fertilizer Limited
Khanewal Road , Multan
office number +92-61-9061 EXT 3110
mobile number +92-321-4043556

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.