Hi Rajak,
For 10S thickness for SS pipes , you shold weld it with low current. There is no acceptance criteria in this condition. The welder for this thickness should be a expert hand...
Regards,
Y.C.Shiva,
Qatar.
On Sat, Dec 12, 2009 at 6:16 AM, Rajak, Sanjib (Bantrel Constructors) <RajakS@bantrelconstructors.com> wrote:
Hi Guys,Can anybody through a light on how to control distortion in thin wall Stainless Sch10s piping welding. Fit up looks absolutely good but after welding we see cave in on weld upto 5/32".what is the acceptable limit or is there any acceptance critiria for cave in condition.Thanks,SanjibThis e-mail and any attachments may contain confidential and
--
privileged information. If you are not the intended recipient,
please notify the sender immediately by return e-mail, delete
this e-mail and destroy any copies.
Any dissemination or use of this information by a person other
than the intended recipient is unauthorized and may be illegal.
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
--
Yadav Shiva Chelliya,
Inspection Engineer,
Doha Qatar,
+974-6166465
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
No comments:
Post a Comment