Saturday, December 26, 2009

Re: [MW:3867] Code, specification or standards applicable for NDT in bridges

Refer to November 2009 issue ASNT's Materials Evaluation, the whole book is focused on NDT of Bridges which gives lot of technical information on this.
 
Subramani.    
----- Original Message -----
Sent: Thursday, December 24, 2009 5:29 PM
Subject: [MW:3893] Code, specification or standards applicable for NDT in bridges

Dear All,

 

I would like to find some Code, Specification or Standards applicable for NDT in bridges

 

May somebody help me to find them?

 

Best regards,

 

TRAN VAN VUONG

Deputy Technical Director

NDT Level III

HP +84 912 262 085

Email: vuongtv@phateco.com

-------------------------------------------

PHATECO

Pha Rung Technical Services JSC.

Inspection Services

Add: 308 Van Cao Str., Haiphong City, Vietnam

Tel: +84 31 6 260 254

Fax: +84 31 3 559 448

Email: admin@phateco.com

Website: www.phateco.com

 

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

No comments:

Re: [MW:34913] Filler wire

E71T-1C  is Charpy Impact tested at -20degC E71T-1CJ is Charpy impact tested at -40degC. AWS Classification for FCAW is only a supplementary...