Saturday, December 19, 2009

Re: [MW:3848] Welding of Carbon steel to Duplex Stainless Steel


Hi KC,
 
Most of them get confused in choosing electrode for this combination,and think to go for Duplex filler wire  / elecrode.
 
But ER 309L is richer filler wire than Duplex ER 2209, hence ER 309 should be used.
 
 
Rgds
K.Sudhakar
Welding Engineer
Singapore
On Wed, Dec 16, 2009 at 1:00 PM, KC <kc.chavda07@gmail.com> wrote:
Hellow, every body,

for welding of SA 516Gr.70 to SA 182 F51 (UNS 31803) Deuples stainless
steel-2205, which filler wire & Electride we have to use.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

No comments:

Re: [MW:34832] Inquiry about Single Bevel with Back Grinding

Dear Uday, As per your question that one is called with backing only,Simple both side you are welding it is backing with strip or without st...