On Sat, Nov 24, 2012 at 8:21 PM, alireza samimi <alireza_samimi1358@yahoo.com> wrote:
--Dear Experts,I have 2 question as below:1- what is the best refrence for gas pipeline hydrostatic tes procedure.2-what is the maximum pipeline segment length can we do it and maximum elevation deference in each test segmentThe pipeline was:
120km *32inch* 12.7mm thick
And 60km * 24inch
Test pressure 104 barFOR ANY EXPLANATION PLEASE GIVE ME THE REFRENCE.
Best Regards
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
No comments:
Post a Comment