Re: [MW:16003] Class-II used instead of Class I film

I to agree with Mr.Nandesh mail,in addition to that you may take a % Check shot by using Class-I films and convince your client.

Sent on my BlackBerry® from Vodafone

---

From: Nandesh Kumar <nandeshkumar@rocketmail.com>

Sender: materials-welding@googlegroups.com

Date: Wed, 21 Nov 2012 23:53:43 +0800 (SGT)

To: <materials-welding@googlegroups.com>

ReplyTo: materials-welding@googlegroups.com

Subject: Re: [MW:15997] Class-II used instead of Class I film

Using class - II film instaed of class - I film need not be a reason for rejection, provided, if you have achieved the required density and sensitivity. Convince your client and do not repeat it in future. ವಂದನೆಗಳೊಂದಿಗೆ / Best regards, Nandesh Kumar A Abu Dhabi, UAE P.S. : Please don't print this e-mail unless you really need to. --- On Wed, 21/11/12, mohd <mohd52100@gmail.com> wrote: From: mohd <mohd52100@gmail.com> Subject: [MW:15984] Class-II used instead of Class I film To: materials-welding@googlegroups.com Date: Wednesday, 21 November, 2012, 9:01 AM Dear all, Our RT subcontractor used by mistakes Class-II (kodak)film instead of class-I (Kodak) Pipe Materials : 8" API 5L GrB  thk : 8.18mm. No of Joints : 35 Joints. As per Spec : Class-I required for thickness less than 12.7mm. Client rejects all RT films. Any possible solution? regards, mohd. -- To post to this group, send email to materials-welding@googlegroups.com To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com For more options, visit this group's bolg at http://materials-welding.blogspot.com/ http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm   The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
 
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.