these combination of welding not acceptable due to heat treatment
requirement for P91
Pandithan/9940739349
Welding consultant
madurai
On 11/19/12, John Henning <jhenning@deltak.com> wrote:
> You should not be welding P91 to A106.
>
> John A. Henning
> Welding & Materials
>
> -----Original Message-----
> From: materials-welding@googlegroups.com
> [mailto:materials-welding@googlegroups.com] On Behalf Of Sankaran Sp
> Sent: Saturday, November 17, 2012 1:38 AM
> To: materials-welding@googlegroups.com
> Subject: [MW:15948] Consumable insert for pipe to pipe wlding
>
> Dear experts,
>
> We are the leading industrial valve manufacturer in Coimbatore ( INDIA),
> we have requirement of pipe to pipe "butt joint" welding by TIG process
> with RT quality.
> Pipe materials are ASTM A 335-P91 & A106 Gr B pipe and sizes are
> 1/2",3/4"& 1"sch 160.
> While welding of pipes we need to maintain 2.0 mm root gap with full
> penetration.
> How to carry out this type of welding with RT quality ?
> Can you give solution for this requirement?
> Can we use consumable inserts between pipes ? If yes where should get
> the consumable inserts in INDIA ? who are the suppliers?
>
> Kindly send your recommendations & address.
>
> Advance thanks and regards,
> Sankaran.SP
> Coimbatore
> INDIA
>
> --
> To post to this group, send email to materials-welding@googlegroups.com
> To unsubscribe from this group, send email to
> materials-welding+unsubscribe@googlegroups.com
> For more options, visit this group's bolg at
> http://materials-welding.blogspot.com/
> http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&
> trk=anet_ug_hm
>
> The views expressed/exchnaged in this group are members personel views
> and meant for educational purposes only, Users must take their own
> decisions w.r.t. applicable code/standard/contract documents.
>
>
> ______________________________________________________________________
> The information in this email is confidential, and is intended solely for
> the addressee(s). If you are not the intended recipient of this email please
> let us know by reply and then delete it from your system; you should not
> copy this message or disclose its contents to anyone. The internet can not
> guarantee the integrity of this message. HAMON (and its subsidiaries) shall
> (will) not therefore be liable for the message if modified.
> ______________________________________________________________________
>
> --
> To post to this group, send email to materials-welding@googlegroups.com
> To unsubscribe from this group, send email to
> materials-welding+unsubscribe@googlegroups.com
> For more options, visit this group's bolg at
> http://materials-welding.blogspot.com/
> http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
>
> The views expressed/exchnaged in this group are members personel views and
> meant for educational purposes only, Users must take their own decisions
> w.r.t. applicable code/standard/contract documents.
>
>
>
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
requirement for P91
Pandithan/9940739349
Welding consultant
madurai
On 11/19/12, John Henning <jhenning@deltak.com> wrote:
> You should not be welding P91 to A106.
>
> John A. Henning
> Welding & Materials
>
> -----Original Message-----
> From: materials-welding@googlegroups.com
> [mailto:materials-welding@googlegroups.com] On Behalf Of Sankaran Sp
> Sent: Saturday, November 17, 2012 1:38 AM
> To: materials-welding@googlegroups.com
> Subject: [MW:15948] Consumable insert for pipe to pipe wlding
>
> Dear experts,
>
> We are the leading industrial valve manufacturer in Coimbatore ( INDIA),
> we have requirement of pipe to pipe "butt joint" welding by TIG process
> with RT quality.
> Pipe materials are ASTM A 335-P91 & A106 Gr B pipe and sizes are
> 1/2",3/4"& 1"sch 160.
> While welding of pipes we need to maintain 2.0 mm root gap with full
> penetration.
> How to carry out this type of welding with RT quality ?
> Can you give solution for this requirement?
> Can we use consumable inserts between pipes ? If yes where should get
> the consumable inserts in INDIA ? who are the suppliers?
>
> Kindly send your recommendations & address.
>
> Advance thanks and regards,
> Sankaran.SP
> Coimbatore
> INDIA
>
> --
> To post to this group, send email to materials-welding@googlegroups.com
> To unsubscribe from this group, send email to
> materials-welding+unsubscribe@googlegroups.com
> For more options, visit this group's bolg at
> http://materials-welding.blogspot.com/
> http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&
> trk=anet_ug_hm
>
> The views expressed/exchnaged in this group are members personel views
> and meant for educational purposes only, Users must take their own
> decisions w.r.t. applicable code/standard/contract documents.
>
>
> ______________________________________________________________________
> The information in this email is confidential, and is intended solely for
> the addressee(s). If you are not the intended recipient of this email please
> let us know by reply and then delete it from your system; you should not
> copy this message or disclose its contents to anyone. The internet can not
> guarantee the integrity of this message. HAMON (and its subsidiaries) shall
> (will) not therefore be liable for the message if modified.
> ______________________________________________________________________
>
> --
> To post to this group, send email to materials-welding@googlegroups.com
> To unsubscribe from this group, send email to
> materials-welding+unsubscribe@googlegroups.com
> For more options, visit this group's bolg at
> http://materials-welding.blogspot.com/
> http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
>
> The views expressed/exchnaged in this group are members personel views and
> meant for educational purposes only, Users must take their own decisions
> w.r.t. applicable code/standard/contract documents.
>
>
>
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
Comments