As far as I know, there is no any such requirements in any code. Refer your project specifications.
ವಂದನೆಗಳೊಂದಿಗೆ / Best regards,
Nandesh Kumar A
Abu Dhabi, UAE
P.S. : Please don't print this e-mail unless you really need to.
--- On Tue, 20/11/12, Pinaki Boxi <boxi.pinaki@gmail.com> wrote:
From: Pinaki Boxi <boxi.pinaki@gmail.com>
Subject: [MW:15995] welds proximity
To: materials-welding@googlegroups.com, "chandan.majumdar" <chandan.majumdar@sgs.com>, majumdar123@yahoo.co.in
Date: Tuesday, 20 November, 2012, 10:31 AM
Dear All,
Can you please confirm if there are any mandatory limitations on weld to weld distance (nozzle to CS/ LS, CS to CS, LS to LS, welds of attachments to other welds etc.)
Details:
Governing code: ASME Sec VIII Dev 1&2 and ASME B31.3 & 31.1
PWHT – Application on requirement basis.
NDT: 100% &10% RT & MPI on attachment/ fillet welds.
Does a weld meeting all above criteria (2 to 4) have an issue, metallurgically, when welds are too close or don't have even spacing e.g. weld long seam to long seam, (piping) reinforcement pad to support etc.
Thanks & regards
Pinaki Boxi.
Paradeep, PDRP Project.
Mob :- 9178466059. -- To post to this group, send email to materials-welding@googlegroups.com To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com For more options, visit this group's bolg at http://materials-welding.blogspot.com/ http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
|
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at
http://materials-welding.blogspot.com/ http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
No comments:
Post a Comment