No problem (It is not problematic) during welding If it is welded with NiCrMo3 type filler with proper Parameters like Heat input,Inter pass temp , and weld bead thickness (preferably smaller bead height )
Regards
Hegde P.B.
--- On Tue, 20/11/12, meisam shokri arfaei <meisamshokri@gmail.com> wrote:
From: meisam shokri arfaei <meisamshokri@gmail.com>
Subject: [MW:15976] welding of In625 to 316 or 613L
To: materials-welding@googlegroups.com
Date: Tuesday, 20 November, 2012, 3:03 PM
Dear experts, Could anyone who has experiens in welding of INCONEL 625 to S.S. 316 or 316L explain which problems mostly could occour during SMAW? I mean about technical (e.g. poor weld surface) and metallurgical (e.g.hot crack). thanks
--
M. Shokri Arfaei International Welding Engineer (IWE) ASNT NDT Level III ERI Metallurgy Lab. Manager Tel: +98-21-66282127 Fax: +98-21-66282779 Please don't print this e-mail unless you really need to. BeGreen! -- To post to this group, send email to materials-welding@googlegroups.com To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com For more options, visit this group's bolg at http://materials-welding.blogspot.com/ http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
|
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at
http://materials-welding.blogspot.com/ http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
No comments:
Post a Comment