Tuesday, November 20, 2012
[MW:15995] welds proximity
Dear All,
Can you please confirm if there are any mandatory limitations on weld to weld distance (nozzle to CS/ LS, CS to CS, LS to LS, welds of attachments to other welds etc.)
Details:
Governing code: ASME Sec VIII Dev 1&2 and ASME B31.3 & 31.1
PWHT – Application on requirement basis.
NDT: 100% &10% RT & MPI on attachment/ fillet welds.
Does a weld meeting all above criteria (2 to 4) have an issue, metallurgically, when welds are too close or don't have even spacing e.g. weld long seam to long seam, (piping) reinforcement pad to support etc.
Thanks & regards
Pinaki Boxi.
Paradeep, PDRP Project.
Mob :- 9178466059.
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
Subscribe to:
Post Comments (Atom)
[MW:34919] Welder qualification certificate
Dear All anyone can share a format for welder certificate and card format Thanks & Best Regards Saleem manhappulath Mob:+9665...
-
Q: What are equivalents for standard Q 235 B (and Q 235 A) for U-channels? ...
-
Definition of buttering from ASME Section IX, QW/QB-492 Definitions: Buttering: the addition of material, by welding, on one or bot...
-
Section I. PRINT READING 3-1. GENERAL a. Drawings . Drawing or sketching is a universal language used to convey all necessary information to...
No comments:
Post a Comment