[MW:15962] RE: 15948] Consumable insert for pipe to pipe wlding

You should not be welding P91 to A106.

John A. Henning
Welding & Materials

-----Original Message-----
From: materials-welding@googlegroups.com
[mailto:materials-welding@googlegroups.com] On Behalf Of Sankaran Sp
Sent: Saturday, November 17, 2012 1:38 AM
To: materials-welding@googlegroups.com
Subject: [MW:15948] Consumable insert for pipe to pipe wlding

Dear experts,

We are the leading industrial valve manufacturer in Coimbatore ( INDIA),
we have requirement of pipe to pipe "butt joint" welding by TIG process
with RT quality.
Pipe materials are ASTM A 335-P91 & A106 Gr B pipe and sizes are
1/2",3/4"& 1"sch 160.
While welding of pipes we need to maintain 2.0 mm root gap with full
penetration.
How to carry out this type of welding with RT quality ?
Can you give solution for this requirement?
Can we use consumable inserts between pipes ? If yes where should get
the consumable inserts in INDIA ? who are the suppliers?

Kindly send your recommendations & address.

Advance thanks and regards,
Sankaran.SP
Coimbatore
INDIA

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to
materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at
http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&
trk=anet_ug_hm

The views expressed/exchnaged in this group are members personel views
and meant for educational purposes only, Users must take their own
decisions w.r.t. applicable code/standard/contract documents.


______________________________________________________________________
The information in this email is confidential, and is intended solely for the addressee(s). If you are not the intended recipient of this email please let us know by reply and then delete it from your system; you should not copy this message or disclose its contents to anyone. The internet can not guarantee the integrity of this message. HAMON (and its subsidiaries) shall (will) not therefore be liable for the message if modified.
______________________________________________________________________

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm

The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.