Re: [MW:12835] requirement for identification marking for plates A 283 GR C

DEAR  MR AZMI

 

IF THE MARKING IS DONE IN STENCLING THEN IT MEANS THAT THE MARKING IS NOT D ONE BY MANUFACTURER , THE PLATE IS OF ANY OTHER MAKE AND HE IS PROVIDING U THE MILL TEST CERTIFICATE OF OTHER COMPANY AND DOING THE MARKING BY A TRADER FOR THE TRACIBILITY

 

I DNT SUGGET U TO ACCEPT IT ,

 

AND STILL IF YOU ARE CONFUSED THEN CROSS CHECK WITH MANUFACTUER OR DO THE TESTING OF THE PLATE

 

REGARDS

MAHESH

On Tue, Sep 20, 2011 at 7:43 PM, asad azmi <azmiasadayub@gmail.com> wrote:

Dear All,

 

For shell plate material of SA283 Gr. C  material identification marking has been done on the plates by two method-

 

 1) stencling   2) steel die stamping

 

Plate number is not  availaible on the die stamping but it is availaible in stencling marking.

 

Whether the plate can be accepted with the above condition.( Plate number avaialible in Stencling marking only)

 

please provide your valuable suggestions.

 

Thanks & Regards

 

Asad Azmi

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.