RE: [MW:9039] Technical solution

Hi Shankar,

7010-G available with Bohler Welding .They stock it in India and approved by some major Piping contractors.

From: materials-welding@googlegroups.com [mailto:materials-welding@googlegroups.com] On Behalf Of Suresh
Sent: Friday, December 31, 2010 10:39 AM
To: materials-welding@googlegroups.com
Subject: Re: [MW:9035] Technical solution

Hii Sankar ,

Plz check below quote from D&H in India , E 7010 Electrode is available in Indian Market . you can choose it .

D&H Secheron through well-built hard work in research and development will meet the various demands of our customers. Below please find a category wise kisting of our latest products.

SMAW / MMAW Electrodes

Mild Steel Electrodes

PRODUCT NAME	AWS CODE	IS CODE
CELLUTHERME - Mo	E7010-G	E7070-G

On Thu, Dec 30, 2010 at 6:23 PM, pradip kumar sil <pradipsil@gmail.com> wrote:

Dear All,

When we use GTAW , we are using ER-70S2/E-7018( Same tensile) combination, alternatively in SMAW , we are using E-6010/E-7018( Different tensile) instead of E-7010. E-7010 is not available(as per ASME) in the market. Is there any technical problem to manufacture it or to use it.

Can somebody tell it.

Regards

Pradip

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

--
Thanks & Best Regards,

Suresh

Mobile No: 91-92 92 905 905

Materails FAQs

Q: What are equivalents for standard Q 235 B (and Q 235 A) for U-channels? (asked by: boris.vielhaber@vait.com) A: DIN Nr. = 2393 T.2, 2394 T.2, EN 10025 W. Nr. DIN 17007 = 1.0038 Design DIN 17006 = RSt 37-2, S235JRG2 (Fe 360 B) Q: What is St DIN 2391 BK material? (asked by: dmcandrews@automaticstamp.com) A: Precision steel tubes, cold-finished/hard. Q: What is C.D.W. Boiler Tube? (asked by: montydude123@yahoo.com) A: Cold Drawn Welded Boiler Tube. Q: WHAT IS W.Nr. 1.4301? PLS TELL US IN EASY LANGUAGUE (asked...

[MW:36169] Cold Bending Qualification

Dear Experts, Can anyone share the inspection requirements or a qualification procedure for cold bending? Our client spec states only the requirements for induction bending and would like to know your opinion on the cold bend inspection requirements. The code of construction is B31.3, Max. 5D bends, A106 SS 316L. Thanks in Advance. -- https://materials-welding.blogspot.com/ https://www.linkedin.com/groups/122787 --- You received this message because you are subscribed to the Google Groups "Materials & Welding" group. To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com . To view this discussion visit https://groups.google.com/d/msgid/materials-welding/1be61cc3-e9c9-4a5f-834d-e8485e248432n%40googlegroups.com .

[MW:30043] Weep hole

If weep hole is not provided in dummy pipe before welding What will happen??? -- https://materials-welding.blogspot.com/ https://www.linkedin.com/groups/122787 --- You received this message because you are subscribed to the Google Groups "Materials & Welding" group. To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com . To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/da251ee6-fa7f-4851-b876-cdb3834ae341%40googlegroups.com .

Materials & Welding

Search This Blog