Monday, December 27, 2010

Re: [MW:8956] Ultrasonic test for 3mm , 5 mm thick stainless sheetsheet

Depends on what equipment + probes you have

--- On Fri, 24/12/10, Kisan Gamane <kisankrishna1506@gmail.com> wrote:

From: Kisan Gamane <kisankrishna1506@gmail.com>
Subject: [MW:8932] Ultrasonic test for 3mm , 5 mm thick stainless sheetsheet
To: materials-welding@googlegroups.com
Date: Friday, 24 December, 2010, 4:37 PM

Dear All
 
Is it posible to do Ultrasonic test for 3mm , 5 mm   thick stainless sheetsheet. Kindly give advice .
 
Thanks in advance.

--

किसन गामणे

नाशिक

जन्मलो म्हणून जगणार नाही
अन असाच राखेत विरणार नाही...
ठसे सोडूनी जाईन जीवन काठावरती
आल्या लाटा कितीही , मिटणार नाही ...

 

खुभी नाही माझ्यात एवढी  कि..!
कुणाच्या  हृदयात ठाण  मांडून  जाईल..!
पण विसरणे सुद्धा अशक्य होईल..!
असे  क्षण  देऊन जाईल.......!

 


--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

No comments:

[MW:34820] RE: 34813] Clarification in Rate of heating and cooling.

Hello,   Please see the response below.   Regards.   P. Goswami, P. Eng, IWE.   From: materials-welding@googlegroups.com <materials-weld...