Dear Asim ,
MIG (metal inert gas) welding and MAG (metal active gas) welding are two sub types of welding method classified as GMAS (gas metal arc welding). In both there processes a continuous metal wire surrounded by a shielding gas are fed through a welding gun. Of the two processes the first one to be developed was MIG process. This process was costly because of high cost of inert gas and therefor was not used that widely. It was mostly used for welding of non-ferrous metals. Subsequently the MIG process was developed which used semi active gas such as carbon dioxide (CO2). This allowed the process to be used for much wider applications.
I hope your doubt was cleared now .
Thank you .
Suresh
Quality Specialist .
On Wed, Dec 29, 2010 at 6:56 PM, ASIM MUNIR <asimmunir.002@gmail.com> wrote:
Dear allplease guide about MIG and MAG welding and difference also.thankx in advance.
--
Regards,
MUHAMMAD ASIM MUNIR
QA/QC INSPECTOR
MOODY INT.
CELL #+923007815592+971566230102--
"QUALITY IS MORE IMPORTANT THAN QUANTITY"
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
--
Thanks & Best Regards,
Suresh
Mobile No: 91-92 92 905 905
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
Comments