Re: [MW:8941] Dissimilar welding filler wire 309LMo

revise the wps and support it with old pqr. no need to qualify.

On Sat, Dec 25, 2010 at 8:36 AM, arvinda shan <arvindashan@gmail.com> wrote:

Dear All,

 

I need a clarification from u.

 

For dissimilar material ie. P1 and P8 ( 312 TP 316L) as per DGS recommends 309LMo. But the PQR qualifies only in 309L for dissimilar. There are no change in F number, P number, SFA number. But only Mo content. In 316L, 2% of Mo. But in filler of 309L only 0.75% of Moly. As in DGS specifically mentioned 309LMo for dissimilar for those category, can we use the same WPS or new PQR to qualify.

 

Need any separate procedure or no need?

 

Plz clarify.

 

Regards

 

arvinda

 

 

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.