Wednesday, December 29, 2010

[MW:8973] RE: 8972] Peening

Peening is a metal working process in which normally shots are blasted on to the metal surface in order to introduce the compressive stresses on the metal surface. Sometimes it is also used for increasing the reactivity of the metal surface for some surface treatments like laser surface melting or cladding or plating.

 

Regards,

Jayshri Dumbre

Senior Executive-Technology

Crompton Greaves Limited

Global R & D Centre

Nagarjuna, Kanjur Marg (East), Mumbai 400 042

T: +91 22 6755 9121  M: +91 9930977322   W: www.cgglobal.com

Save the environment. Please print only if essential.

 

 

 

 

 

 

 


From: materials-welding@googlegroups.com [mailto:materials-welding@googlegroups.com] On Behalf Of sn vl
Sent: Tuesday, December 28, 2010 8:16 PM
To: materials-welding@googlegroups.com
Subject: [MW:8972] Peening

 

Hi..

 

  What is known as Peening..?

 

Regards

SNvl

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

CG DISCLAIMER: This email contains confidential information. It is intended exclusively for the addressees. If you are not an addressee, you must not store, transmit or disclose its contents. Instead please notify the sender immediately; and permanently delete this e-mail from your computer systems. We have taken reasonable precautions to ensure that no viruses are present. However, you must check this email and the attachments, for viruses. We accept no liability whatsoever, for any detriment caused by any transmitted virus.

No comments:

[MW:34820] RE: 34813] Clarification in Rate of heating and cooling.

Hello,   Please see the response below.   Regards.   P. Goswami, P. Eng, IWE.   From: materials-welding@googlegroups.com <materials-weld...