Thursday, December 30, 2010
[MW:9010] Fw: CONSUMABLE SELECTION FOR JOINT OF DIFFERENT THICKNESSES.
On Thu, 30 Dec 2010 12:03:09 +0530 "kshitish tripathy"kshitish.tripathy@rediffmail.com wrote
DEAR ALL,
KINDLY SUGGEST ME THAT AS PER IS CODE WHAT WILL BE THE CONSUMABLE SELECTION WHILE WELDING THE JOINT OF DIFFERENT THICKNESSES. WHETHER THE GROOVE DESIGN & CONSUMABLE SELECTION WILL BE AS PER LOWER THICKNESS ONE. IN WHICH NUMBER OF IS CODE IT IS THERE; PL. GUIDE ME.
THANKING YOU
K.C.TRIPATHY
SR.QA/QC ENGG.
UHDE INDIA LIMITED
IOCL PARADEEP SITE.
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
Subscribe to:
Post Comments (Atom)
[MW:34866] Presentation for WPS ,PQR AND WPQ as per ASME Sec IX in power point
Dear Experts. If anyone having presentation of WPS,PQR and WPQ as per ASME SEC.IX in power point then please share . Regards Sanja...
-
Q: What are equivalents for standard Q 235 B (and Q 235 A) for U-channels? ...
-
Definition of buttering from ASME Section IX, QW/QB-492 Definitions: Buttering: the addition of material, by welding, on one or bot...
-
Section I. PRINT READING 3-1. GENERAL a. Drawings . Drawing or sketching is a universal language used to convey all necessary information to...
No comments:
Post a Comment