Re: [MW:4706] What is filler metal for GTAW process for A240 - 321 to A266

I would check the FN just to make sure that no hot cracking will occur

---

  From: Raghuram Bathula [raghurambathula@gmail.com]
  Sent: 05/04/2010 21:57 ZE5B
  To: materials-welding@googlegroups.com
  Subject: Re: [MW:4704] What is filler metal for GTAW process for A240 - 321 to A266

ER309

On Mon, Apr 5, 2010 at 9:46 AM, rupesh jambhale <rupeshjambhale@gmail.com> wrote:

Dear all
What is the filler metal for GTAW process when welding A240 - 321
plate with A266 Gr 1 Tube sheet forging?
--
Regards,
Rupesh

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

To unsubscribe, reply using "remove me" as the subject.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.